Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her
47 93 82 00
Tom handlekurv

PLANET Konverter 10/100TX - 100FX SC MM Multimode 100Mbit SC

Forsiden PC & NETTVERK Nettverk Nettverkstilbehør PLANET Konverter 10/100TX - 100FX SC MM Multimode 100Mbit SC
Du må logge inn for å handle/se priser.
PLANET Konverter 10/100TX - 100FX SC MM Multimode 100Mbit SC (FT-802)

PLANET Konverter 10/100TX - 100FX SC MM Multimode 100Mbit SC

Varenummer:
FT-802
EAN:
4711213680526
  • Produkt Mediekonverterere
Beskrivelse

FT-80X
Fast Ethernet Bridge Media Converters

The PLANET FT-80X is Fast Ethernet Bridge 100Base-FX fiber to 10/100Base-TX shielded twisted pair (STP) converter. It supports selectable for half-duplex and full-duplex operations and supports a variety of fiber options. The converter auto-adapts to the highest level of performance supported by the device connected to the STP port. When the device is a switch or a workstation that supports full duplex, the converter adapts to the full-duplex mode and provides an effective 200Mbps bandwidth. When the connected device is a hub or a workstation that supports only half duplex, the converter adapts to the half-duplex mode and provides the nominal 100Mbps bandwidth. An override switch provides total manual control over the half/full-duplex operation, in fiber-optic interface. The fiber port of converter operates at 1310 nm and uses ST, SC, MT-RJ, VF-45 or WDM connectors. Multi-mode models that support distances up to 2 km and single-mode models that support distances up to 15/35/50 km are available.
The FT-80x series are with LFP (Link Fault Pass Through function) (LLCF/LLR) and the DIP Switch design. LLCF/LLR can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net. The DIP Switch provides disable or enable the LFP function.
LLCF (Link Loss Carry Forward) means when a device connected to the converter and the TP line loss the link, the converter's fiber will disconnect the link of transmit. LLR (Link Loss Return) means when a device connected to the converter and the fiber line loss the link, the converter's fiber will disconnect the link of transmit. Both can immediately alarm administrators the problem of the link media and provide efficient solution to monitor the net.

Key Features

Comply with IEEE802.3, IEEE802.3u 10/100Base-TX, 100Base-FX Standard
Connectors: One RJ-45 (Auto-MDI/MDI-X) Twisted Pair, EIA568
One Fiber-optic, 1310nm wavelength, connector-type and distance vary with model.
  • FT-806A20: Tx-1310nm, Rx-1550nm
  • FT-806B20: Tx-1550nm, Rx-1310nm
  • Data Transfer Rate:
  • TP: 10/100Mbps
  • FX: 100Mbps
  • Duplex mode support:
  • Full or half-duplex mode by Auto- Negotiation (TP)
  • Full or half-duplex mode by DIP-switch (FX)
  • LED indicators: PWR, FX LNK/ACT, FX FDX/COL, TP 100, TP LNK/ACT, TP FDX/COL
    DIP-switch: 2 DIP-switches
  • Rear DIP-switch: FX duplex mode selection
  • Side DIP-switch: LFP (Link Fault Pass-through) mode selection

  • Product

    Model

    FT-80x

    Protocol

    IEEE 802.3u, 100Base-FX, 100Base-TX

    Dimensions

    70 x 97 x 26 mm (W x D x H)

    Weight

    0.2kg

    Power

    5V DC, 2A, max.

    Connectors and Cables

    Twisted Pair / STP

    RJ45, Category 5 (EIA/TIA 568)

    Fiber-optic

    Vary on model;
    X=1,2,3,4,5,6
    1:ST
    2:SC
    3:MT-RJ
    4:VF-45
    6 Single SC; WDM

    Multi-mode cable

    50/125, 62.5/125 µm

    Single-Mode (SM) cable

    9/125 µm

    Supported Distances and function

    Twisted Pair STP

    100 m / 328 ft.

    Multi-mode Fiber Optic

    412 m / 1,350 ft. (Half-Duplex)
    2 km / 1.2 mile. (Full-Duplex)

    Single-Mode (SM)

    412 m / 1,350 ft. (Half-Duplex)
    15 km / 9 mile. (Full-Duplex)
    35km / 21 mile. (Full-Duplex)
    50km / 31 mile. (Full-Duplex)

    Port Mode

    TP: Half and Full Duplex, auto-negotiation
    FX: Half and Full Duplex via DIP switch

    Environmental

    Temperature

    0 to 50 degrees C

    Humidity

    5-90% (non-condensing)


    FT-801 100Base-FX to 10/100Base-TX (ST, MM) Bridge Media Converter
    FT-802 100Base-FX to 10/100Base-TX (SC, MM) Bridge Media Converter
    FT-802S15 100Base-FX to 10/100Base-TX (SC, SM, 15Km) Bridge Media Converter
    FT-802S35 100Base-FX to 10/100Base-TX (SC, SM, 35Km) Bridge Media Converter
    FT-802S50 100Base-FX to 10/100Base-TX (SC, SM, 50Km) Bridge Media Converter
    FT-803 100Base-FX to 10/100Base-TX (MT-RJ, MM) Bridge Media Converter
    FT-804 100Base-FX to 10/100Base-TX (VF-45, MM) Bridge Media Converter
    FT-806A20 * 100Base-FX to 10/100Base-TX (SC, SM) Bridge Media Converter (TX: 1310)
    FT-806B20 * 100Base-FX to 10/100Base-TX (SC, SM) Bridge Media Converter (TX: 1550)
    *Remark FT-806A20/806B20 should runs in pair. It means you must connect FT-806A20 in one end another FT-806B20 in other end.



    Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.