Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her
47 93 82 00
Tom handlekurv

LD SYSTEMS LD DDQ SUB 18 Trekk Sort Nylon

Forsiden LYD & BILDE Audio / Video HI-FI/Stereo LD SYSTEMS LD DDQ SUB 18 Trekk Sort Nylon
Du må logge inn for å handle/se priser.
LD SYSTEMS LD DDQ SUB 18 Trekk Sort Nylon (LDDDQSUB18B)

LD SYSTEMS LD DDQ SUB 18 Trekk Sort Nylon

Varenummer:
LDDDQSUB18B
  • Type Tilbehør
Beskrivelse

DDQ SUB 18


The LD Systems DDQ Sub 18 is a powerful active subwoofer with digital signal processing for demanding PA applications. It is precisely adapted for combination with the full-range speakers of the DDQ Series and is equally suitable for use with tops made by other manufacturers.

The compact bass-reflex design is loaded with an 18" FaitalPRO bass speaker that has a 4" voice coil and a neodymium magnet driven by two 700-watt Hypex Class D power amplifier modules with a highly efficient switching power supply with a total output of 1400 watts RMS. The DDQ Sub 18 attains a maximum sound-level pressure of 134 dB with a frequency response curve of 30 - 120 Hz.

The Sharc DSP programmed especially for the DDQ subwoofers ensures distortion-free and reliable operation even at maximum volume levels with a 1ms look ahead limiter, frequency and phase correction, as well as all protection circuits, and has a large dynamic range of 127dB/113 dB (ADC/DAC). Seven DSP Presets permit selectable crossover frequencies between 80 and 120Hz. Eight additional presets make it possible to realize cardioid configurations of 2 or 3 subwoofers, whereby it is possible to attain rear attenuation of up to 20dB. In addition to XLR inputs and outputs, the DDQ Sub 18 has a separate mono output with a 100Hz high-pass filter. Additional features are LED function indicators and a ground lift switch; the volume and preset controls can be deactivated to prevent inadvertent adjustment.

The cabinet of the DDQ Sub 18 is made of 18mm thick multiplex with an extremely durable polyurethane finish. It is equipped with two M20 threaded flanges and ergonomic handles and is prepared for mounting of casters.

Product number: LDDDQSUB18
Product type: PA subwoofer
Type: active
Design: DSP controlled
Low/mid driver dimensions: 18"
Low/mid driver dimensions (mm): 457.2mm
Woofer magnet: Neodymium
Woofer brand: Faital Pro
Woofer voice coil: 4"
Woofer voice coil (mm): 101.6mm
Amplifier: Class D
RMS: 1400 (2 x 700)W
Frequency response: 30 - 120Hz
Max. SPL (continuous): 126dB
Max. SPL (peak): 134dB
Protection circuits: RMS speaker limiter, DSP-based "look ahead" limiter, short circuit, RMS power supply limiter, over-current
Controls: Power, DSP/ Gain enable, ground lift, Gain, DSP presets
Indicators: signal, Operate, DSP/ Gain disable, Peak Limit
Line inputs: 2
Line input connectors: XLR
Line outputs: 3 (2x Input Link, 1x Sat Out with 100Hz high-pass)
Line output connectors: XLR
Operating voltage: Switching Power Supply, 180 - 264 V ~ / 47 - 63 Hz
Cabinet material: 18 mm Plywood
Cabinet surface: Polyurethane
Cabinet construction: vented
Width: 510mm
Height: 700mm
Depth: 725mm
Weight: 44.5kg
Features: 2 x threaded flange (M20), 3 x corner handles, 15 x DSP presets with 4 selectable cardioid setups and 7 selectable crossover frequencies (80-120Hz), prepared for mounting of casters



Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.